The hydraulic steering gear is a full-hydraulic steering gear with cycloidal rotating valve, which is composed of a servo valve and a cycloidal rotating stator pair. It is a full hydraulic steering system composed of a supply pump, relief valve (or diverter valve), steering cylinder and other connecting accessories.
Hydraulic steering gear need to pay attention to the following points when disassembling:
1. When decomposing the hydraulic steering gear, hard metal objects such as a hammer should not be used for hard knocking, but copper rod or rubber mallet should be used for gentle knocking.
2. The sealing surface or precision mating surface shall not be pry open with hard metal such as a screw to avoid scratching the surface.
3. Be extra careful when disassembling to avoid losing or damaging small objects.
4, all parts should be thoroughly cleaned before assembly, assembly seals should be coated with lubricating oil, precision matching parts can be pushed directly by hand, not hard knock.
5, assembly shall not wear cotton thread and other gloves easy to fall residue, shall not use cotton yarn and other rags to wipe the sealing or precision matching surface, shall not be assembled in a dusty environment.
The above is the hydraulic steering gear disassembly pay attention to what related matters, I hope to have a certain help for you. If you need to welcome to our company to consult related matters.
